Description
Briggs & Stratton Horizontal 23 HP Vanguard 1″ x 2-29/32 386447-045823hp Briggs Vanguard
1″ x 2-29/32″ shaft, tapped 3/8″ with 1/4″ keyway.Cast iron sleeves, fuel pump, full pressure lube w/ oil filter and oil cooler system,electric start w/ 16amp alternator.Recoil Start auxiliaryLess fuel tank, less muffler.Has starter and throttle controls on engine.Universal replacement engine for premium lawn & gardenand industrial/commercial applications.Model 386447-0458.85 lbs
Engine Specifications
| SKU |
386447-0458-G1 |
| Model/Type/Trim |
386447-0458-G1 |
| Air Cleaner |
Dual Element |
| Alternator |
20 amp |
| Carburetor |
Installed |
| Casing Clamp |
Additional – Ship Loose |
| Controls |
AFS Loose & Man Fric @ Panel |
| Crankshaft |
1″ Dia X 2.90/2.98″ Long |
| Crankshaft Details |
1/4″ Keyway, 3/8-24 D&T |
| Dead Idle Speed |
1550+/-100 |
| Emissions Certification |
EPA EXH, EU |
| Engine Base |
Installed |
| Engine Idle Speed |
Gov Idle 1750+/-100 |
| Engine Package |
Vanguard |
| Engine Sold In |
USA (49), EU, UK |
| Engine Speed |
3600+/-100 |
| Flywheel |
Heavy – Cast Iron |
| Fuel Line |
6″ Hose w/20 Micron Filter |
| Fuel Pump |
Installed |
| Fuel Shutoff |
Without |
| Fuel Tank |
Without |
| Label Power |
23 HP – Model 3864 |
| Oil Cooler |
Installed |
| Oil Dipstick |
Extended |
| Oil Drain |
Flush, Dual Sides |
| Oil Filter |
Installed |
| Oil Pressure Switch |
Oil Pressure Switch 1 – 4 PSI |
| Purge Port |
Low Vac Capped,Connector Loose |
| Rewind Position |
9:00 |
| Wire Harness |
Without |
Technical Specifications
| Model Series |
3864 |
| Displacement |
627 |
| Oil Capacity |
48 oz (1.42 l) |
| Valve Configuration |
OHV |
| Flywheel Torque |
125 lb/ft (169.5 Nm) |
| Governor Arm Torque |
117 lb/in (13.2 Nm) |
| Carb Mount |
65 lb/in (7.5 Nm) |
| Plug Gap |
0.03 in (0.76 mm) |
| Intake Valve |
.004-.006 in (.10-.15 mm) |
| Exhaust Valve |
.004-.006 in (.10-.15 mm) |
| Idle Speed |
1750 |
| Air Gap |
.008-.012 in (.20-.30 mm) |
| Flywheel Puller Part |
19203 |
| Flywheel Holder Part |
19433 |
| Connecting Rod Torque |
115 lb/in (13.0 Nm) |
| Sump Torque |
150 lb/in (17.0 Nm) |
| Head Torque |
165 lb/in (18.5 Nm) |
