Description
2Lb Alkalinity Increaser
Stabilizes pH
Fast-Dissolving
Prevents Corrosion
Gentle on Liners
This essential balancing chemical raises total alkalinity levels to prevent “pH bounce” and protect your pool equipment from acidic water. Use this whenever your testing kit shows alkalinity levels falling below the recommended 80-120 ppm range.
Why You’ll Love It
Protects SurfacesReining in low alkalinity helps prevent etching on plaster and staining or wrinkling on vinyl liners.
Ends pH FluctuationsBy acting as a buffer, it keeps your pH levels steady so you aren’t constantly fighting to balance your water.
Equipment LongevityProperly balanced water helps prevent the premature corrosion of heaters, pumps, and ladders.
Comfortable SwimmingBalanced water is much easier on the eyes and skin compared to water with low alkalinity and erratic pH.
Best For
Small pools & Spas
Correcting “pH Bounce”
Fresh water fill-ups
Vinyl and Plaster surfaces
How to Use
Test water to determine current alkalinity level.
Calculate dosage based on the label instructions.
Broadcast the granules directly into the deep end.
Keep the pump running for 4-6 hours before retesting.
Pro Tip
Always adjust your alkalinity before trying to dial in your pH, as alkalinity acts as the “anchor” that keeps your pH in place.
Always follow label directions. Test and balance water chemistry before and after treatment. Keep chemicals stored sealed, cool, and dry.
