Description
The Hypertherm Powermax 65 hand plasma cutting system is a 3 phase 400v CE model with built-in technology including Smart Sense that automatically selects the correct pressure and Spring Start for consistent starting and torch reliability.
Cutting Capacity:
20mm (3/4″) @ 500mm/min (20 ipm)
25mm (1″) @ 250mm/min (10 ipm)
Severance:
32mm (1-1/4″) @ 125mm/min (5 ipm)
Gouging:
Removal Rate 4.8kg/hour (10.7 lbs/hr)
Groove Profile 3.5mm x 6.6mm (0.14″ x 0.26″)
Duramax H65 torches come in a choice of 7.6m (25ft) or 15.2m (50ft) lengths.
Hypertherm Powermax 65 Product Sheet
CONTACT US FOR FURTHER REDUCTIONS 0141 763 1226
Technical Specification:
Input Voltage ( 10%):
380/400v, 3 Phase, 50 – 60Hz
Input Current @ 9kW:
380/400v, 3Ph,15.5/15 A
Output Current(Amps): 20 – 65 A
Rated Output Voltage: 139 VDC
Duty Cycle @ 40C (104F)
50% @ 65 A, 100% @ 46 A
Open Circuit Voltage (OCV): 270 VDC
Dimensions (with handles): 500 x 234 x 455mm
Weight (including 7.6m torch): 26kg
Input Power Cable Length: 3m (10ft)
Power Supply Type: Inverter – IGBT
Gas Supply: Clean, dry, oil free air or nitrogen
Recommended Gas Inlet Flow Rate/Pressure:
Cutting 189l/min (400 scfh; 6.7 scfm) @ 85 psi (5.9 bar)
Gouging 212 l/min (450 scfh; 7.5 scfm @ 70 psi (4.8 bar)
Warranty: Power supply 3 year / Torch 1 year
